Troubleshooting to Common Fault of Automatic Frying Machine

4.7/5 - (20 votes)

 

Deoiling machine

 

Automatic frying machine is a product that integrates the functions of frying, de-oiling and conveying. It has two control options, automatic and manual. Its operation is more flexible than that of ordinary frying machine.

1. Electric heating tube fails to heat.

Fault cause: the power is not supplied. Troubleshooting method: check the circuit and turn on the power supply.

Fault cause: the heating tube is damaged. Troubleshooting method: replace the damaged tube with a new one.

Fault cause: the coil of the contactor is broken. Troubleshooting: replace the contractor.

Fault cause: the temperature control instrument is damaged. Troubleshooting method: replace the temperature controller of the same specification.

 

Frying machine

 

2. Heating device fails to heat to a required temperature

Fault cause: the water level is too high. Troubleshooting: discharge the surplus water.

Fault cause: residue on the oil-water interface accumulated. Troubleshooting: discharge residue through the drain valve.

Fault cause: sensor or instrument is broken, troubleshooting method: replace sensor or instrument with a new one.

3. Oil spills when the temperature is raised

Fault cause: the oil of poor quality. Troubleshooting: replace with edible oil.

Fault cause: the water level is too high. Troubleshooting: discharge water to a position aiming at oil pipe.